How To Clean A Soundbar
(Best Cleaning Method)
Soundbars are a popular choice for those looking to get the most out of their listening experiences, whether it be in a home theatre, RV, college dorm…you name it.
Unfortunately, no matter where you use a soundbar, it is bound to get dirty or even scratch over time if not cleaned properly.
Luckily, learning how to clean a soundbar is simple, no matter the brand or how long it has been since its last cleaning.
How To Clean A Soundbar
The best way to clean a soundbar is to use compressed air to remove surface dust, vacuum stubborn dirt out of the speaker mesh, sanitize the surface with isopropyl wipes, and place the soundbar back in a clean area.
In the following steps, you will learn how to clean a Soundbar the right way.
What You Will Need:
Steps For Cleaning A Soundbar:
1: Remove Dust From Surrounding Area
If your soundbar is mounted on the wall, then there is likely little dust that surrounds it. However, if it sits on a flat surface, dust can easily begin to pool up on the surrounding area.
To ensure that the soundbar will be placed back in a dust-free area when it is done being cleaned, this area must be cleaned first.
To begin, use a household vacuum, or this highly rated shark vacuum, to suck up any dirt or debris around where your soundbar lives, whether it be on a shelf, in an entertainment center, or on the wall.
2: How To Remove Dust From the Soundbar (No Contact)
Before you begin removing the dust, ensure you have a clean place to work. If you already do, continue reading.
The goal is to remove all the dust without rubbing it into the surface area of the soundbar, as both the speaker mesh and any painted plastic can scratch easily.
To remove dust from the soundbar, spray the entire surface area with compressed air to remove as much as possible, with as little contact as possible.
Make sure to spray all particles out of the perforated speaker mesh, as this can greatly improve sound quality.
- If the speaker mesh holes aren’t clear yet, continue on to step 3.
If you’re curious about learning about the top soundbars out RIGHT NOW, check out this guide:
3: How To Remove Dust From the Soundbar (Contact)
After compressed air has been used to remove dust from the soundbar it is safe to initiate a contact-based cleaning method.
If your soundbar speaker grill still has dirt stuck in the perforation, use a household vacuum to suck the dirt out of the holes. Be careful to not scratch the mesh with the tip of the vacuum.
Once done, spray the plastic exterior of the soundbar with a soapy water solution, avoiding spraying directly onto the speaker mesh. Wipe the plastic with a microfiber cloth.
At this stage 99% of the dust and dirt will be removed from the surface of the soundbar, exposing larger bits of grime that will be targeted next.
4: How To Sanitize A Soundbar
Use 70% Isopropyl alcohol disinfectant wipes to wipe down the entire surface, including the speaker mesh, of the soundbar
This will cut through any grease that may be on the surface of the paint, as well as eliminate small smudges and scuffs.
5: How To Seal and Protect a Soundbar
To finish off the cleaning process, apply a quality detail spray to the plastic surface of the soundbar.
Rub the detail spray in small circular motions until all the plastic has been covered.
Detail sprays have small amounts of synthetic wax that will seal, protect, and restore the shine of your soundbar. Give it a try if you think it would be beneficial!
6: Place The Soundbar Back In Its Home
Congratulations, you have successfully cleaned your soundbar. This will greatly improve the visual appearance, and potentially the sound quality.
Now that it is clean, place the soundbar back in place so you can begin listening to riveting soundtracks ASAP.
Tech Cleaning Articles
How To Clean Razaer Golaith Extended Chroma